- Model: FAB-PBM12300
- Series: Woven Paver Base Fabric Material
- Size: 12' x 300'
- Square Feet / Roll: 3,600
- Free Shipping
- Need a Written Quote?
- Volume Pricing Available on Large Rolls
(widths 9 feet and above)
- Questions? Call (800) 520-7731
woven Paver Base Fabric Material
- High Strength / Excellent Permittivity
- Monofilament Woven Material
- Contractor Grade
- UV Resistant
- Will Not Rot or Mildew
- Resistant to Rodent and Insect Damage
All of our geotextile fabrics are professional-grade and are designed for use in both residential & commercial applications. Our fabrics are designed for years of continuous use in the designated application.
- Level and smooth out the subgrade. Remove sharp rocks and other objects that could puncture the fabric during the installation.
- Unroll and place the woven fabric on the desired area and pull taut. Provide an overlap ranging from 18" - 24" depending on the strength of the subgrade. Secure the fabric with fabric staples, staggering the staples at an approximate rate of 1 staple per 5 feet.
- Carefully back fill with graded crushed stone onto fabric. Properly installed woven paver base fabric can improve the long-term performance of your project 50-70%.
- All Fabric Ships for Free (standard ground, see map)
- Expedited shipping only available on orders over $2,000
Call: (800) 520-7731 for pricing and ship times
Shipping estimates shown on the map pertain to this specific product only. Fabric orders typically ship same day if the order is placed before 12:00 noon CST. Transit times displayed in the map are listed in business days, and are approximate. The day that the order is shipped is not counted as a transit day.
Other sizes available:
|Fabric Property||Test Method||Units||Minimum Average |
|Grab Tensile||ASTM D 4632||lbs. / ft||350 x 200|
|Grab Elongation||ASTM D 4632||%||15x15|
|Trap Tear Strength||ASTM D 4533||lbs. / ft||100 x 70|
|CBR Puncture Strength||ASTM D 6241||lbs. / ft||800|
|Percent Open Area||CEO-02215||%||6|
|Permittivity||ASTM D 4491||sec-¹||.5|
|Permeability||ASTM D 4491||cm / sec||.14|
|Water Flow||ASTM D 4491||gpm/ft²||60|
|UV Resistance||ASTM D 4355||% Strength Retained|
After 500 Hours
|AOS||ASTM D 4751||US Sieve||40|
To the best of our knowledge, the information contained herein is accurate. However, Pro Fabric Supply cannot anticipate all conditions under which the above product information and the products which we distribute or the products of other distributors or manufacturers in combination with the products which we offer, may be used. We accept no responsibility for results obtained by the application of this information or the safety or suitability of the products we distribute either alone or in combination with other products. Final determination of the suitability of any information or material for the used contemplated, or its manner of use, and whether the suggested use infringes any patents is the sole responsibility of the user. Please note: Pro Fabric Supply is a distributor of geotextile fabric, not the manufacturer. We source material from a number of different United States based geotextile manufacturers.